Standard Kit 30 kg: 10 kg Diklor + 10 l Algastop + 10 kg Ph Minus + Free test kit

Complete kit of chemical products for the maintenance of your swimming pool consisting of:

• 10kg of chlorine
• 10kg of PH reducer
• 10lt of anti-algae
• free water test kit.

Specific product for disinfecting the water in your public or private swimming pool.
Certified product.

USING THE KIT TO PERFORM A SHOCK TREATMENT

- Thoroughly clean the bottom and surface of the pool with the net, and proceed with cleaning with the vacuum cleaner or with the cleaning robot if you have one.
- Carefully clean the skimmer baskets, or in the case of infinity pools, clean the water collection grids thoroughly
- Perform a thorough backwash of the sand filter
- Perform superchlorination with powdered chlorine (Diklor Super)
- After a couple of hours check the pH value and bring it to a range of values ​​between 7.2 and 7.4
- Leave to recirculate for 24 hours
- Add the anti-algae product to the tank
- Leave to recirculate for 48 hours

ANTI-ALGAE
Concentrated, non-foaming algaecide
Applications
Prevents and eliminates fungi, algae and bacteria. It exerts a very strong algaecide, antifungal and bactericidal action synergistically with chlorine, without giving rise to phenomena of acquired resistance. The antialgae exerts a strong flocculating power and does not clog diatom filters.
Use and doses
Initial treatment: 50-100 gr/m³.
Maintenance: 20-30 gr/m³.
Use with specific dosing systems or disperse directly into the tank
Composition
Long chain ammonium polyquaternaries 5-15%.
Warnings and information notes
Biodegradability 90%.

GRANULAR CHLORINE 63%
Applications
Dicloro 63 is a stabilized chlorine with rapid solubility to be used for the disinfection of swimming pool water. A product with high stability to photolysis and evaporation, it develops an acidic chlorine solution with consequent reduction in the consumption of the acid corrector. Chlorine, in addition to disinfection, also performs an oxidizing function, thus eliminating non-filterable organic substances.
Use and doses
Chlorine 63 can be used manually or mechanically, by means of a dosing pump connected to a small tank containing the chlorine and water solution.
DOSAGE: Maintain the chlorine level between 1.3 and 1.5 ppm (2 to 2.4 g/cubic meter of 63% sodium dichloroisocyanurate).
Shock treatment (break point): from 5 to 10 ppm depending on the concentration of combined chlorine (from 8.4 to 16.5 g/cubic meter)
CONSUMPTION: Consumption can vary from 1 to 3 ppm depending on the temperature, the nature of the make-up water and the frequency of use of the system.
Composition: Chlorine
Warnings and information notes
Store in a dry and ventilated place. Keep packages sealed and away from other chemicals. Handle with adequate eye and respiratory protection.

PH LESS GRANULAR
Acid pH corrector in powder for swimming pools
Applications
Yellowish solid for reducing and stabilizing pH. It is recommended to dissolve the product in a bucket of water beforehand and then add the solution to the tank.
Use and doses
For highly alkaline waters: 300 – 400 g per 100 m3 of water to lower the pH by 0.1 units
For medium alkaline waters: 200 to 300 g per 100 m3 of water to lower the pH by 0.1 units
Composition: Sodium bisulfate
Warnings and information notes
Corrosive. Causes burns.
Irritating to respiratory tract.
Wear suitable gloves.